Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kenmore
A garage door that’s swollen, binding, or hanging off bent tracks is what usually brings Kenmore homeowners to the phone. If your 1970s or ’80s door has finally given up, we can help you sort out a replacement that fits your actual opening, not a stock size that almost does. Reaching Kenmore from our Renton base is a straight shot north, and we know the streets around the Sammamish River and the Lake Washington shoreline well enough to plan a proper measure and installation without surprises. We also work on the exact brands many Kenmore garages already have, from LiftMaster openers to Genie and Clopay doors. Call (833) 508-9224 to set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kenmore Homeowners Call Renton Garage Door Repair Pros for Garage Door Installation
Kenmore is a city of older homes and older doors, and much of our installation work here starts with hardware that’s simply past its life. Our technicians have up to 13 years of experience, and they’ve learned to read a Kenmore garage quickly: the door that catches on one side because the jamb swelled, the torsion spring that’s near the end of its cycle rating, the track that took a hit from a falling branch. That matters when you’re deciding whether to repair what’s there or put in a new door sized to the opening you actually have.
We keep our estimates written and upfront. The price is quoted and agreed before any work starts, so you know the number going in. For new door projects, we measure first and schedule the install, because this isn’t same-day work. And because we handle springs, openers, and general repair alongside installation, one call covers it all instead of sending you to a second contractor for related work.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kenmore
A new door is a real investment, and we treat the measure as the most important part of the job. Here’s what we cover for Kenmore homeowners.
New Door Installation
Full replacement of a worn or failing door, sized to your existing opening. On older Kenmore homes that often means dealing with a non-standard width before anything gets ordered, so we measure carefully and confirm the fit. Many installs here also replace the legacy torsion spring, drums, and cables at the same time, since those parts usually can’t be reused on a modern door.

Single Car Door
Kenmore has a lot of one-car attached garages, and many were built with openings that don’t match today’s standard sizes. We measure the actual frame, account for the older jamb, and set up a door that opens and closes cleanly within it. If yours has swelled in the damp and won’t seat right, that’s a common reason to replace rather than keep patching.

Double Car Door
Two-car garages in Kenmore’s split-levels and ramblers sometimes carry original doors that have been out of balance for years. We check the balance, the spring condition, and the track alignment before recommending a replacement versus a repair. A new double door with fresh hardware takes the strain off an aging opener at the same time.

Custom Garage Door
Some Kenmore homes, especially the older lakeside cottages and anything near a critical-area setback, need a door that fits an unusual opening or a specific look. We work on wood and steel doors in a range of styles and can match the proportions your garage actually has. Our technicians have up to 13 years of experience sizing doors to openings that don’t follow the standard.
Trusted Brands We Service in Kenmore
We work on and install doors and hardware from Genie, Clopay, Amarr, and Wayne Dalton, among other established brands. That means if your Kenmore garage already has a Clopay panel door or an Amarr steel door, our technicians arrive familiar with the hardware and how it’s put together. We don’t stock parts in a warehouse, so on repair calls we source the right component and get back to you, and on installations the door is ordered to fit your opening. If a brand-specific opener is part of the picture, we handle the compatibility questions too. Whatever make is on your garage, it’s worth asking us first.
Common Garage Door Installation Problems We See in Kenmore Homes
- Legacy torsion springs past their cycle rating. The original springs on 1980s and ’90s Kenmore doors often exceed their 10,000-cycle rating and snap, sometimes taking cables and drums with them on a door that was already out of balance. That’s why a new door install usually comes with fresh spring hardware.
- Wood panel doors that swell and delaminate. Kenmore’s constant damp gets into original wood doors, so they bind in the jambs, bend the opener rail, or strip the opener gear. If the panels are soft and the door won’t seat, it’s usually a replacement rather than a patch.
- Bent tracks from falling branches and moss. The old-growth canopy over much of Kenmore drops limbs and tracks fill with moss and debris, which bends the tracks and jams the rollers. A new installation has to correct that alignment before the door is hung.
- Moss and algae on the north-facing side. Most Kenmore doors pick up a green coating on the shaded side within a few years. It’s cosmetic, but it’s a good sign to check the seals and the spring at the same time.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Kenmore, WA
New door installation in Kenmore typically runs $700 – $2,200, depending on the size, material, and whether the existing hardware has to be replaced at the same time. These are estimated ranges, and the written estimate sets the final price, quoted and agreed before any work starts.
| Item | Typical Range in Kenmore |
|---|---|
| New Door Installation | $700 – $2,200 |
| Spring Repair (one spring) | $180 – $340 |
| Track Realignment | $120 – $240 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. If your old door just needs a spring and a track fix rather than full replacement, that’s a real option worth pricing out. Call (833) 508-9224 for a free estimate.
We Also Serve Cities Near Kenmore
We install and repair garage doors throughout the north end, including Lake Forest Park, Bothell East, Bothell West, and Mountlake Terrace. If you’re in any of these areas and your door is past its service life, we can measure and quote a replacement. Wherever you are in Kenmore or the surrounding towns, our garage door installation team can help.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kenmore
Usually a full new door is the better call once a 1978 wood door has swollen, delaminated, and bent its tracks, because panels and legacy hardware for doors that old are often no longer supported. Repairing springs alone won’t fix a door that’s out of square in a damp jamb. We’ll give you a free estimate on both paths so you can see the numbers before deciding. Call (833) 508-9224.
Yes, once it’s measured properly, which is why we measure first and don’t order a stock size. Kenmore’s older one-car garages often have non-standard openings, so the door gets sized to your actual frame. Because of the city’s tight building-permit culture and shoreline or critical-area setbacks, a replacement on some older garages may need a site review, so check with the city’s building department on your specific lot before ordering. Call (833) 508-9224 to set up a free measure.
For Kenmore’s climate, a mid-range insulated steel door is plenty, because the driver here is moisture and damp rather than deep cold or ice. Insulation helps with noise and with keeping the garage a bit steadier, but the bigger factors are a good bottom seal and a finish that stands up to constant wet. We’ll walk you through the options during the estimate. Call (833) 508-9224.
Often the door is the problem, not the opener, because a swollen, out-of-balance wood door drags and makes the opener work harder than it should. Before replacing an opener, we check the door’s balance and the condition of the spring and tracks. If the door is past its service life, a new door takes the load off the opener. Either way, you get a written quote before work begins. Call (833) 508-9224.
Trees and moss matter here because falling branches bend tracks and moss clogs rollers and seals, so we clear and align everything before hanging a new door. On the shaded north side, expect a green coating to return within a few years no matter what door you choose. A new installation sets the tracks and seals right so the door runs clean and the moss has less to grab onto. Call (833) 508-9224 for a free estimate.
Ready for a New Garage Door in Kenmore?
If your Kenmore door has swollen, delaminated, or bent one track too many, we can measure your opening, quote a replacement, and schedule the install. The estimate is free and the price is agreed before any work starts. Call (833) 508-9224. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Renton Garage Door Repair Pros.